Products

On-Grid Solar Power Systems

Bhanu Solar Grid-connected photovoltaic power system, or Grid-connected PV power system is an electricity generating solar PV power system that is connected to the utility grid.

Bhanu Solar photovoltaic power system is carbon negative over its lifespan, as any energy produced over and above that to build the panel initially offsets the need for burning fossil fuels. Even though the sun doesn't always shine, any installation gives a reasonably predictable average reduction in carbon consumption.

Advantages

Bhanu Solar Grid-connected PV systems are comparatively easier to install as they do not require a battery system. Where extra Cost on Batteries can be avoided.

Bhanu Solar Grid interconnection of photovoltaic (PV) power generation systems has the advantage of effective utilization of generated power because there are no storage losses involved.



 

 

Two Metering Systems for measuring Electric Power Supply

Net-Metering, a single new bi-directional meter which is used for measuring consumption of electric energy for noting the either of the supplies. When the electricity consumed from the Solar grid (or imported to existing electricity supply), the meter readings will move forward; but, when electricity is produced and send it to the grid, the meter readings will move backward.

Gross Metering, there will be two separate meters: one for measuring existing electricity supply consumption and the other measures Solar Panel electricity production. Consequently, two different bills will be generated: one for consumption and other for production. There is no change in the way your consumption is billed (as it happened previously), but you get bills separately for the electricity you produce or use. the cost of electricity that is payable or receivable is decided by the state’s electricity regulatory commission.






Net Metering – Scenario

Suppose you use 10 units of electricity in a day and produce 8 units, your meter will show a reading of 2 units. And if you use 10 units of electricity and produce 12 units, then your meter will show - 2 units. Your bill at the end of month will be based on net units consumed/produced. If you generate extra electricity in any month, the surplus is carried over to the next month and netted. At the end of a year, if your total production is more than that of what you consumed, then you will get paid for the next surplus electricity produced at the cost decided by your state’s electricity regulatory commission.

Off-Grid Solar Power Systems

Bhanu Solar Off-grid connected solar is a solar electricity system with battery backup. During the day, the sun shines and charges the batteries as well as supplies power to your home/Business. During the evening or on rainy days when the sun isn’t shining you use the power stored in the batteries. Your house is not connected to the national grid hence the name: off-grid.





Stand Alone System with Batteries

In Bhanu Solar stand-alone photovoltaic power systems is another alternative energy system, the electrical energy produced by the photovoltaic panels cannot always be used directly. As the demand from the load does not always equal the solar panel capacity, battery banks are generally used.

The primary functions of a storage battery in a stand-alone PV system are:

Energy Storage Capacity and Autonomy

To store energy when there is an excess is available and to provide it when required.

Voltage and Current Stabilization

To provide stable current and voltage by eradicating transients.

 



Supply Surge Currents

To provide surge currents to loads like motors when required.

Advantages

Bhanu Solar Off grid solar power light systems, a much easier installation process.

Unlike the constraints of traditional UPS powered lighting where you have to use existing infrastructure, or complete costly trenching to put the power where you need it, Bhanu Solar powered light systems can be installed just about anywhere to ensure minimize Energy Consumptions. This also lowers costs by allowing existing structures and areas to be undisturbed for installation.

Solar Water Heating System

Bhanu Solar Water Heating System is the widely used product among the Solar device family. It is being established as home or commercial product and can be used extensively to provide non-stop running hot water, is easy to install and long-lasting device.

Bhanu Solar Provide two types of solar collectors:

Flat-Plate collectors

Evacuated-Tube Collectors

Solar Street Light

Bhanu Solar Street Lighting System is an innovative and modern lighting system for illumination of streets, squares, junctions, avenues and key intersections located in areas without access to the power grid. It consists of CFL/LED lamp, battery, control electronics, Solar Photo Voltaic Module, Mounting structure and associated hardware. The lighting system is designed aesthetically and really useful for conserving power and producing light in a hassle-free manner for the benefit of public. It helps the clients to reduce the power bills and a solution to power cuts.

Solar Fencing System

Bhanu Solar Fencing System is a one of the best available options to provide secured fencing to factories, colonies and other vital installations. It uses renewable solar energy which is available round the clock independent of the grid failure

Bhanu Solar Photo voltaic module Consists :

Energizer, Fence Voltage Alarm (FVAL), Battery and Charge Control Unit (CCU). In today’s world where security has become an important aspect, Solar Fencing Systems are a prodigious option.

Fencing system has just sufficient power to give living beings a short, sharp but safe blow that they never be forgotten. It is this piece that makes it popular as it doesn’t cause loss of life while preventing a living being from breaking the fence.

Bhanu Solar panels have been designed for easy maintenance.

 

The maintenance of the solar panels will be very cautiously taken care by our expert technical team. In general the maintenance covers as under:

Cleaning of Panel systems from time to time depending on the requirement.

Check the Panel are clean and the cleaning process will be carried out when the panels are cool to avoid breakage through thermal shock.

Ensure not to use high pressure hoses or cleaners in order to make sure the panels, lamination or cells are damage free.

System Inspection will be done on regular basis to ensure.

Ensure Fasteners are secure, tight and free from corrosion.

Check the Electrical connections are secure, tight, clean, and free of corrosion.

Check the mechanical integrity of the cables is intact.

Check the Bonding points to ground are tight, secure and free from corrosion (which could break the continuity between the panels and ground).

Top